Monday, January 26, 2015

What a long strange trip its been.........

What a long, strange trip to Trinidad it has been! Trinidad is not your typical Caribbean paradise.  Some cruisers come here to get below the 10th parallel and out of the predicted path of the hurricanes that blow June - November.  Others arrive for the excellent availability of yacht repair.  Still others stop here in transit from Europe via South America on their way north.
Enjoying the sun in Tobago

We have been to Trinidad twice.  The first time was on our way from Grenada to Suriname, a South American country 550 miles south of Trinidad.  The second time was for major boat repairs and as a safe haven for Atalanta as we visited the USA for the holidays.  Our repair work experience in Trinidad is mixed story.  

We had two major jobs done: install a new engine and have the bottom of the boat completely resurfaced.  Each job takes a level of expertise readily available in Trinidad.  The work began as we hauled out on November 17 at the Powerboats Boat Yard.  Brent, the yard manager, located contractors to begin the work that would take over 2 months to complete.  This is 20+ days longer than anticipated.
A new epoxy barrier coat being applied to
Atalanta

The skills of the workers here are commendable.  The problem is getting contractors to stick to a timeline.  It's not as simple as just saying, “Hey mon, it’s island time.”  Contractors have way too much work scheduled and struggle with organizing the execution of multiple jobs simultaneously.  This created frustration, delays, and living onboard on the hard for far too long.

The bottom needed more work than anticipated. As they removed layers, they discovered improper repairs made prior to our owning the boat.  Atalanta was sanded back to bare fiberglass.  The keel was re-glassed and two coats of epoxy-fairing compound were applied to the entire hull.  This was sanded until perfectly smooth.  Then five coats of epoxy barrier coat were applied with two coats of primer and three coats of bottom paint.  These last 10 coats were all applied in one day by an army of workers under the supervision of Cow – a man who knows much about the boat refinishing. His expertise is to be commended.

A new Yanmar 100 Hp engine is now sitting in the spot formerly occupied by temperamental “Mr. Perkins.”  The installation was slow-going and more complicated than anticipated but resulted in Atalanta having a reliable power source (in addition to sails) that will carry us toward new adventures for years to come.

Preparing to Splash in Trinidad

Thankfully, we are about to float again.  Our good friend John is joining us on our further exploration of the eastern Caribbean.  Tentatively, we plan to go from Trinidad to Tobago (same country, different island) and then back to Grenada for a few days.  Unfortunately, we will miss Carnival in Trinidad but we have already been in this one place far too long. There are a number of islands in the Grenadines to explore that we missed on the way south last year.  John will depart from St. Lucia and then are we looking forward to hosting other guests that we can share our travelling life with. We are also eager to catch up with friends we made in the Caribbean who have already sailed further north including Tony and Ann on Argosea and Jonas and Sofie-Ann on Lady Anilla.
They named it after John
What a tribute
So we are off again! After spending 7 months in Trinidad, Grenada and Suriname, it’s time to get moving!  We are now in TOBAGO.  It feels great to welcome John on board to this beautiful island.
Tobago, W.I.
Store Bay
Enjoying a brew at the local resort


Thanks for following our travels.    
Richard and Kay

Friday, January 9, 2015

On "The Hard" in Trinidad......still

Power Boats Yard
in
Trinidad

So here we are, still on the hard in “Powerboats” boat yard in Trinidad.  While we fully expected the engine install to be completed by now, we didn’t anticipate that we would have extensive work needed on the bottom to correct a problem that predated our ownership of Atalanta.
Atalanta is a high quality boat but old.  She turned 31 this year.  As such she has had a number of owners that have done work on her.  Some of that work was not done with the materials best suited to the job.  Hence our issues with the bottom.  A filler that is often used on cars (Bondo) was used to fair the bottom under the barrier coat and bottom paint.  Over time this material absorbed water and began to blister.  To correct the issue, we have had to grind down the entire boat below the waterline, re-fair it with an epoxy resin, apply 5 coats of barrier coat, two coats of primer and three coats of bottom paint.  This process takes time and the application of these materials must be done in a very specific way. 
Preparing Atalanta's "skirt"
We are looking forward to the completion of all this work so that we can get on with our travels.  We planned to leave here on the 15th of January, but that is looking unlikely.  Now our goal will be to leave on the 20th, joined by our good friend John who has will join us on our trip north for a number of weeks.

We promise that this blog will become far more interesting once we begin to move again.  Until then with all our best.

Richard and Kay


With the skirt on
repairs to the bottom
can now
begin